Replace your old and worn out weather stripping before water damage creates a costly headache. Slides onto existing 3/16" track commonly found on the outer wall of the slide out.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at this Rubber Bulb Seal for your RV's Slide Out. This seal prevents water from leaking into your slide out on your RV. This will slide into the track that is on the inside edge of your slide-out wall. When it closes, it will seal against the camper wall or the slide-out wiper when the slide-out is fully retracted and it's gonna give you a nice tight seal there.
You can see this is gonna provide plenty of surface contact has this flattens out. It gets wider so that you'll have lots of contact there to make sure that the seal is gonna be sufficient or keeping out any water or pests. It's also going to prevent collapse. So, even if we squeeze it beyond flat, it will pop right back out so it's gonna be very durable for you. This is commonly paired with a wiper seal on your slide-out.
This will work with the two part numbers that you see on the screen there. So depending on your setup, your RV, one of those should work for you, work with this to make sure that water is going to stay out of your RV so you don't have to worry about mold and that sort of thing being brought into your RV where it can cause damage. So as far as our measurements go, this is right about 3/4 of an inch wide. When I measure the height, measure it at just over an inch, call it an inch and an eighth overall and then we are going to get 30 feet of the seal. So it should do a great job of wrapping around your entire slide out so that you have plenty of a connection there and plenty of seal to keep out that water or pests.
Now, there are other options available here etrailer.com. So, if this isn't exactly the kind of seal that you need, I would encourage you to check out some of those other options. Make sure that you're getting the one that's going to fit for your RV but this is made here in the USA. So, you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. So, it should do a really good job for you.
Hold up really well for a nice long time. That's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Do you have a question about this RV Slide Out Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.